Tecseal Grip
This pile has a series of perpendicular of-settings legs on the backing which hold the pile tightly into the profile. Designed for those profiles where the height of the groove is higher than normal profiles.
- The pile remains in place without moving during the process of cutting, assembly and other manufacturing operations.
- Tecseal-Grip is designed to be inserted on line at the pvc extruder.
Tolerances
a BASE WIDTH
Only available for base of 4.8 mm and 6,9 mm
±0,10 mm
b PILE HEIGHT
+ 0,25 mm – 0,15 mm
If the height of the pile is superior to 6,50 mm
+ 4% -2,5%
c BASE THICKNESS
0,75 mm ± 0,10 mm
d PILE WIDTH
Check with our technical department